Snmp-Server - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

snmp-server

Sn
snmp-server
no snmp-server
Syntax
Default
Command Mode
Usage Guideline
Examples
Switch(config)# snmp-server
Switch(config)# no snmp-server
CLI Reference Guide
To enable the Simple Network Management Protocol (SNMP) agent, use the
snmp-server command. To disable the SNMP agent, use the no form of this
command.
None
Disabled
Global configuration
The remote SNMP manager sends SNMP requests to agents and receives
SNMP responses and notifications from agents. When the SNMP agent is
enabled, the remote SNMP manager can query SNMP agents and send SNMP
traps.
This example shows how to enable the SNMP server.
This example shows how to disable the SNMP server.
Verify the settings by entering the show snmp-server command.
snmp-server
822