D G S - 3 2 0 0 - 1 0 : 4 # c r e a t e s n m p c o m m u n i t y S y s t e m r e a d w r i t e
C o m m a n d : c r e a t e s n m p c o m m u n i t y S y s t e m r e a d w r i t e
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
5-2 delete snmp community
Purpose
Used to delete an SNMP community string previously entered on the switch.
Format
delete snmp community <community_string 32>
Description
The delete snmp community command is used to delete an SNMP community string entered on the
switch using the create snmp community command above.
Parameters
Parameters
community_string
Restrictions
You must have administrator privileges.
Example
To delete a read-only level SNMP community "System":
D G S - 3 2 0 0 - 1 0 : 4 # d e l e t e s n m p c o m m u n i t y S y s t e m
C o m m a n d : d e l e t e s n m p c o m m u n i t y S y s t e m
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
5-3 show snmp community
Purpose
Used to display the SNMP community configurations on the switch.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
An alphanumeric string of up to 32 characters used in the
authentication of users wanting access to the switch's SNMP agent.
61