Qos Map Dscp-Mutation - D-Link DGS-6600-48T Cli Reference Manual

Modular layer 3 chassis ethernet managed switch
Hide thumbs Also See for DGS-6600-48T:
Table of Contents

Advertisement

DGS-6604
m

qos map dscp-mutation

qos map dscp-mutation MAP-NAME INPUT-DSCP-LIST to OUTPUT-DSCP
no qos map dscp-mutation MAP-NAME
Syntax Description
MAP-NAME
INPUT-DSCP-LIST
OUTPUT-DSCP
Default
Command Mode
Usage Guideline
Example
Switch(config)#qos map dscp-mutation mutemap1 30 to 8
Switch(config)#qos map dscp-mutation mutemap1 20 to 10
CLI Reference Guide
To define a named differentiated services code point (DSCP) mutation map, use
the qos map dscp-mutation command in global configuration mode. To return to
the default mapping, use the no form of this command.
Name of the DSCP mutation map in a string length up to 32 characters (no
space is allowed)
Specifies the list of DSCP code point to be mutated to another DSCP value . The
range of DSCP is 0 to 63. A series of DSCPs can be separated by comma (,) or
hyphen(-). No space is before and after , or -.
Mutated DSCP value; valid values are from 0 to 63.
OUTPUT-DSCP equals the INPUT-DSCP
Global configuration
When a packet is received by an interface, the incoming DSCP can be mutated
to another DSCP right before any QoS operations based on the DSCP mutation
map.
The DSCP mutation is helpful to integrate domains with different DSCP
assignment.
When configuring a named DSCP mutation map, note the following:
• Multiple commands can be entered to map additional DSCP values to a
mutated DSCP value.
• A separate command can be entered for each mutated DSCP value.
Up to 15 ingress-DSCP mutation maps can be configured to mutate the incoming
DSCP value before any QoS operation. After the ingress-DSCP mutation map
creation, use qos dscp-mutation command to attach the ingress-DSCP
mutation map to physical interfaces.
The DSCP-CoS map and DSCP-color map will still base on packet's original
DSCP. All the subsequent operations will base on mutated DSCP.
This example shows how to map DSCP 30 to mutated DSCP value 8, DSCP 20
to mutated DSCP 10, the mutation map named, mutemap1:
Use the show qos map privileged EXEC command to verify the settings.
qos map dscp-mutation
499

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-6604Dgs-6600 series

Table of Contents