DGS-6604
m
Switch# configure terminal
Switch(config)# interface eth3.1
Switch(config-if)# storm-control broadcast action shutdown
Switch(config-if)# storm-control broadcast level pps 900
Switch(config-if)# show storm-control interface broadcast
Interface
Storm
-------------------------------------------------------------
eth3.1
Broadcast
Switch# configure terminal
Switch(config)# interface eth3.1
Switch(config-if)# no storm-control broadcast action
CLI Reference Guide
This example shows how to configure Broadcast storm control action and level. It
assigns the shutdown action and rising threshold to 900 pps for interface eth3.1.
Action
shutdown
This example shows how to return to the default setting for Broadcast storm
control action on interface eth3.1.
Verify the settings by entering the show storm-control interface command.
Type
pps
storm-control action (Interface)
Threshold
900
861