Dvmrp Ip Dvmrp - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604
ip dvmrp
ip dvmrp
no ip dvmrp
Syntax
Default
Command Mode
Usage Guideline
Example
Switch(config)# interface vlan1
Switch(config-if)# ip dvmrp
CLI Reference Guide
Use this command to enable DVMRP on the current interface. Use the no form to
disable DVMRP on the interface.
None
Disabled
VLAN interface configuration
This command is only valid for the VLAN interface.
The VLAN interface will have DVMRP protocol enabled (or disabled).
Before enabling DVMRP function on an interface, it is necessary to enable IP
multicast routing with the ip multicast-routing command in global configuration
mode.
Only one multicast routing protocol can be enabled on an interface, make sure
no other multicast routing protocol is configured before DVMRP is enabled . If
another protocol is enabled, an error messge is displayed.
This example shows how to enable the DVMRP protocol on the interface
VLAN 1.
Verify the settings by the show ip dvmrp interface command.
ip dvmrp
252