D-Link DGS-6600-48T Cli Reference Manual page 628

DGS-6604 m
ExpTime
Switch>show ip dvmrp neighbor detail
Capability Flags: N-Network, S-SNMP,M-MTRACE, G-GENID, P-PRUNE, L-LEAF
Neighbor address: 10.10.10.11
Interface: vlan1
UpTime:
ExpTime:
Generation ID: 0035ef6d
Major Version: 3
Minor Version: 255
Capabilities:
Number of bad routes Received:
Number of routes Received:
Number of PROBE Received:
Number of REPORT Received:
Number of PRUNE Received:
Number of GRAFT Received:
Number of GRAFTACK Recvd:
Display Field
Descriptions
Display Field
Capability Flags
CLI Reference Guide
The neighbor time-out interval, which SHOULD be set to 35 seconds.
This setting allows early detection of a lost neighbor yet provides
tolerance for busy multicast routers.
These time-out values MUST be coordinated between all DVMRP routers
of a particular physical network segment.
The expire time shown here is the amount of time remaining before
reaching the neighbor time-out interval setting.
This example shows how to display neighbor detail information.
0DT0H23M49S
0DT0H0M30S
e (Flags: M,G,P)
Description of the significant display fields.
LEAF - Whether this neighbor router is a leaf router.
PRUNE - This neighbor router understands pruning.
GENID- This neighbor router sends Generation Id's.
MTRACE - This neighbor router handles Mtrace requests.
SNMP - This neighbor router supports the DVMRP MIB.
Network - This neighbor will accept a network mask.
0
0
144
1
0
0
0
Description
show ip dvmrp neighbor
618