Show Errdisable Recovery - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show errdisable recovery

show errdisable recovery
Syntax
Default
Command Mode
Usage Guideline
Example
Switch# show errdisable recovery
ErrDisable Reason
------------------
loopback-detection
Interfaces that will be recovered at the next timeout:
Interface Errdisable Reason
--------- -----------------
eth2.4 loopback-detection
Total Entries: 1
CLI Reference Guide
Use this command to display the error-disable recovery timer related setting.
None.
None
EXEC mode or any configuration mode.
You can use this command to verify the setting of error disable recovery timer.
This example shows how to display the setting of error disable recovery timer.
Timer Status
---------------
enable
Timer Interval
----------------
200 seconds
Time left(sec)
--------------
179
show errdisable recovery
582