Default-Gateway (Management Port) - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 mm

default-gateway (management port)

AD
default-gateway IP-ADDRESS
no default-gateway
Syntax Description
IP-ADDRESS
Default
Command Mode
Usage Guideline
Example
switch#configure terminal
switch(config)#
switch(config)#mgmt-if
switch(mgmt-if)#default-gateway 10.1.1.254
switch(mgmt-if)#end
CLI Reference Guide
Use this command to set the IP address of the default gateway. Use the no form
of this command to revert to the default value.
IP address in four-part dotted decimal format.
IP-ADDRESS: 0.0.0.0.
Management interface
The management port will send out IP packets for other IP subnets through this
IP address.
This example shows how to set 10.1.1.254 as the IP address of the default
gateway.
Verify the settings by entering the show mgmt-if command
default-gateway (management port)
136