Rmon Statistics - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

rmon statistics

rmon statistics ENTRY-NUMBER [owner NAME]
no rmon statistics ENTRY-NUMBER
Syntax Description
ENTRY-NUMBER
owner NAME
Default
Command Mode
Usage Guideline
Examples
Switch# configure terminal
Switch(config)#interface eth3.2
Switch(config-if)#rmon statistics 3 owner monitor
Switch(config-if)#rmon statistics 4
Switch#configure terminal
Switch(config)#interface eth3.2
Switch(config-if)#no rmon statistics 3
CLI Reference Guide
Use the rmon collection stats interface configuration command to collect Ethernet
group statistics, Use the no form of this command to return to disable RMON
entry.
Remote Network Monitoring (RMON) table index. The range is 1 to 65535.
(Optional) Name of the owner that configured this entry and is using its assigned
resources. The length of the name can be from 1 to 255 characters.
Disabled
Interface configuration
This command allows the administrator to enable or disable RMON on Ethernet
interfaces of the device. If the administrator enables the RMON mechanism on
the specific interface, the device will automatically collect statistical information
about the traffic for the interface. The administrator can also perform operations
on the supported MIB RMON groups.
This example shows how to create two RMON entries on Ethernet interface 3.2.
This example shows how to disable the RMON entry on Ethernet interface 3.2.
rmon statistics
514