DGS-6604
m
show gvrp statistics
show gvrp statistics [ interface INTERFACE-ID [ , | - ] ]
Syntax Description
INTERFACE-ID
,
-
Default
Command Mode
Usage Guideline
Example
Switch# show gvrp statistics interface eth3.5-3.6
Port
-----------------------------------------------------------------------------
eth3.5
.
RX
TX
eth3.6
.
RX
TX
Total Entries: 2
CLI Reference Guide
Use the show gvrp statistics command to display the statistics for gvrp ports.
(Optional) Specifies the interface to display. If no interface is specified, the
statistics on all interfaces will be shown.
(Optional) Specifies a series of interfaces, or separate a range of interfaces from
a previous range.
(Optional) Specifies a range of interfaces.
None
User EXEC or any configuration mode
It only displays the ports which have the gvrp state enabled.
This example shows how to display statistics for a range of gvrp ports.
JoinEmpty
JoinIn
0
4294967296
4294967296
0
0
LeaveEmpty
0
0
4294967296
4294967296
0
0
0
0
show gvrp statistics
LeaveIn
Empty
0
4294967296
0
0
0
0
0
589