Ip Igmp Snooping - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ip igmp snooping

ip igmp snooping
no ip igmp snooping
Syntax
Default
Command Mode
Usage Guideline
CLI Reference Guide
Use this command to enable IGMP Snooping function on the switch. Use the no
form of this command to disable IGMP Snooping function.
None
IGMP snooping is disabled on all VLAN interfaces
The IGMP snooping global state is disabled by default. The global function
control is not stored in NVRAM.
VLAN interface configuration or Global configuration
Under interface configuration for an interface, the corresponding VLAN must first
be created.
When the user executes the command under global configuration, it will enable/
disable all existing VLAN IGMP snooping function. However the command takes
effect only in the running configuration and it will not be kept in NVRAM for the
next start up configuration. For a VLAN interface, the command can be kept in
NVRAM for the next startup system configuration mode.
To disable IGMP snooping on a VLAN interface, use the no ip igmp snooping
under VLAN interface configuration mode.
The command will, under global configuration mode, enable IGMP snooping
functions for all existing VLANs. Similarly, no ip igmp snooping will disable IGMP
snooping function for all of the existing VLANs.
As a VLAN is deleted, the related IGMP snooping setting for the VLAN is also
removed from system configuration.
ip igmp snooping
262