Show Ip Protocols - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip protocols

show ip protocols [rip] [ospf] [bgp]
Syntax Description
rip
ospf
bgp
Default
Command Mode
Usage Guideline
Examples
Switch# show ip protocols rip
Routing Protocol is "rip"
Sending updates every 30 +/- (0 to 5) seconds, next due in 19 seconds
Timeout after 180 seconds, garbage collect after 120 seconds
Default redistribution metric is 1
Redistributing:
type
------------------------
Default version control: send version 2, receive version 2
Interface
vlan141
Routing for Networks:
vlan141 (10.253.41.2/24)
Routing Information Sources:
Gateway
10.253.41.1
the maximum number of RIP routes allowed: 12288
Number of routes (excluding connected): 3
Distance: (default is 120)
Switch#
CLI Reference Guide
Use this command to display the state of the dynamic routing process.
(Optional) RIP protocol information is displayed.
(Optional) Display OSPF global settings which are related to the overall IP
routing function.
(Optional) Display entries in the Border Gateway Protocol (BGP) routing table.
Specifies the autonomous system to be displayed. .
If no option is specified, the summary of all running routing protocols is displayed.
User EXEC or any configuration mode
The information displayed by the show ip protocols command is useful when
debugging routing operations. The output can help identify a router suspected of
delivering faulty routing information.
The following example shows how to output the state of the RIP protocol:
metric
Send Recv
2 2
Distance Last Update
120 0DT0H0M11S
V2-broadcast
Off
Bad Packets
Key-chain
Bad Routes
0
show ip protocols
1
670