Snmp-Server Location - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

snmp-server location

snmp-server location TEXT
no snmp-server location
Syntax Description
location TEXT
Default
Command Mode
Usage Guideline
Example
Switch(config)# snmp-server location HQ 15F
CLI Reference Guide
Use this command to configure the system location information. Use the no
snmp-server location command to set the system location information to empty.
A string that describes the system location information.The maximum length is
128 characters (please refer to RFC1213 for the maximum length in detail). The
syntax is a general string that allows spaces.
Not configured
Global configuration with privilege level 15
Configure the system location information on the switch.
This example shows how to set up the system location information with string HQ
15F.
Verify the settings by entering the show snmp-server command.
snmp-server location
834