[52] Acct-Input-Gigawords; [53] Output-Gigawords - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide
radius include acct-link-count

[52] Acct-Input-Gigawords

Use the following command to manage the Acct-Input-Gigawords RADIUS attribute.
radius include input-gigawords

[53] Output-Gigawords

Use the following command to manage the Acct-Output-Gigawords RADIUS attribute.
radius include output-gigawords
208
CLI Commands Used to Modify RADIUS Attributes
radius include acct-link-count
Use to include the Acct-Link-Count attribute in Acct-Start and Acct-Stop messages.
You can control inclusion of the Acct-Input-Gigawords attribute by enabling or
disabling this command.
See radius include
Example
host1(config)#radius include acct-link-count acct-stop disable
Use the no version to restore the default, enable.
radius include input-gigawords
Use to include the Acct-Input-Gigawords attribute in Acct-Stop messages.
You can control inclusion of the Acct-Input-Gigawords attribute by enabling or
disabling this command.
See radius include
Example
host1(config)#radius include input-gigawords acct-stop disable
Use the no version to restore the default, enable.
radius include output-gigawords
Use to include the Acct-Output-Gigawords attribute in Acct-Stop messages.
You can control inclusion of the Acct-Output-Gigawords attribute by enabling or
disabling this command.
See radius include
Example