Show Dot1X Sessionstatistics - Allied Telesis IE220 Series Manual

802.1X C
OMMANDS
1
SHOW DOT X SESSIONSTATISTICS

show dot1x sessionstatistics

Overview This command shows authentication session statistics for the specified interface,
which may be a static channel (or static aggregator) or a dynamic (or LACP)
channel group or a switch port.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show dot1x sessionstatistics [interface <interface-list>]
Syntax
Mode Privileged Exec
Example See sample output below showing 802.1X authentication session statistics for
port1.0.2:
awplus#
Command Version 5.4.9-2.1: command added to AR2050V, AR3050S, and AR4050S
changes
C613-50644-01 Rev B
Parameter
interface
<interface-list>
show dot1x sessionstatistics interface port1.0.2
Authentication session statistics for interface port1.0.2
session user name: manager
session authentication method: Remote server
session time: 19440 secs
session terminat cause: Not terminated yet
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
Specify a port to show.
The interfaces to display information about. An interface-list
can be:
• a VLAN (e.g. vlan2)
• a switchport (e.g. port1.0.4)
• a static channel group (e.g. sa2)
• a dynamic (LACP) channel group (e.g. po2)
• a continuous range of interfaces separated by a hyphen
(e.g. port1.0.1-port1.0.3)
• a comma-separated list (e.g. port1.0.1, port1.0.3-port1.0.4).
Do not mix interface types in a list.
"Getting Started
Guide.
1362