Table of Contents
Advertisement
QB-RL78G1F In-Circuit Emulator
This chapter explains the QB-RL78G1F setup procedure.
Setup can be completed by performing installation setup in the order in which it appears in this chapter.
Perform setup along the lines of the following procedure.
See 1.2 Names and Functions of Hardware for clock positions.
Software settings
See 2.1 Software Settings.
Clock settings
See 2.2 Clock Settings.
Mounting and connecting connectors
See 2.3 Mounting and Connecting Connectors (When Using S Type).
See 2.4 Mounting and Connecting Connectors (When Using T Type).
Connecting QB-RL78G1F to target system
See 2.5 Connecting QB-RL78G1F to target system.
Connecting USB interface cable and AC adapter
See 2.7 Connecting USB interface cable and AC adapter.
Switching power on and off
See 2.8 Switching power on and off.
R20UT3352EJ0100 Rev.1.00
Jan 30, 2015
CHAPTER 2 SETUP PROCEDURE
CHAPTER 2 SETUP PROCEDURE
Page 17 of 41
Advertisement
Table of Contents
