Nortel Express User Manual page 40

Getting started
f.
g. Double-click the server icon in the SMI Workbench folder.
Result: The client workstation connects to the server, and the Nortel
Networks SMI Login dialog box appears.
Note: If the connection fails, then a message indicates a problem with
connecting to the server. Check the IP address in the shortcut properties
and try again.
2 Enter your user ID.
Note: The user ID for the customer administrator is "custadmin."
3 Enter your password as provided by your Nortel representative.
4 Click OK.
Result: If you are logging on for the first time with a new password, the
Password Expiry dialog box appears.
5 Click Change Password.
Result: The Change Password dialog box appears.
6 For Old Password, enter the password that you used in step 3.
7 For New Password and Confirm New Password, enter the new password,
and then click OK.
Result: The Administration window appears.
Note: If you attempt to log on with the customer administrator's user ID
(custadmin), but cannot provide the correct password, the system locks you
out after the third attempt. If this happens, contact your distributor for
support.
40
Click Finish.
Result: The server icon appears in the SMI Workbench folder.
Standard 2.0
Symposium Express Call Center