Other Procedures For Phonesets - Nortel Express User Manual

Configuring switch resources

Other procedures for phonesets

To change the name of a phoneset
Notes:
You must deacquire a phoneset before you change its properties.
!
You cannot change the telephony/port address assigned to a phoneset. To
!
change these properties, delete the phoneset and recreate it.
In the Phonesets window, select the phoneset you want to change, and then
choose File ➝ Properties.
For step-by-step instructions, press F1 to access the online Help.
To preview the list of phonesets
From the Phonesets window, choose File ➝ Print Preview.
For step-by-step instructions, press F1 to access the online Help.
To print the list of phonesets
From the Phonesets window, choose File ➝ Print.
For step-by-step instructions, press F1 to access the online Help.
To delete a phoneset
Notes:
Before deleting the phoneset from the system, ensure that the phoneset
!
status is either Not-Acquired, Deacquire Failed, or Acquired-Failed. You
cannot delete a phoneset if it is Acquired.
This procedure does not delete the phoneset from the switch.
!
If this phoneset is a voice port type, the associated voice port is also
!
deleted.
186
Standard 2.0
Symposium Express Call Center