Settings For Microarray Measurements - Thermo Scientific NanoDrop One User Manual

Microarray reported values

Settings for Microarray Measurements

Microarray settings
Setting Available Options
Sample type and dsDNA (with non-editable factor of
Factor 50 ng-cm/µL)
ssDNA (with non-editable factor of
33 ng-cm/µL)
RNA (with non-editable factor of
40 ng-cm/µL)
Oligo DNA with non-editable
calculated factor in ng-cm/µL
Thermo Scientific
The initial screen that appears after each measurement (see previous image) shows
a summary of the reported values. To view all reported values, press and hold the
sample row. Here is an example:
• sample details (application used and pedestal or cuvette)
• sample name
• created on (date sample measurement was taken)
• nucleic acid concentration
• A260
• A260/A280
• dye 1/dye 2 concentration
• sample type
• analysis correction
• factor
The Microarray Setup screen appears after you select the Microarray application
from the Nucleic Acids tab on the Home screen. To show the Microarry settings from
the Microarray measurement screen, tap
4
> Microarray Setup.
Description
Widely accepted value for double-stranded
DNA
Widely accepted value for single-stranded DNA
Widely accepted value for RNA
Factor calculated from user-defined DNA base
sequence. When selected, available DNA base
units (i.e., G, A, T, C) appear as keys. Define
sequence by tapping appropriate keys. Factor
is calculated automatically based on widely
accepted value for each base unit.
NanoDrop One User Guide
Nucleic Acid Applications
Measure Microarray
37