Set Up Wireless Connections - Thermo Scientific NanoDrop One User Manual

9 Learning Center
Set Up the Instrument

Set up Wireless Connections

192 NanoDrop One User Guide
– connect other end of Ethernet cable to either the computer Ethernet port or
an active network wall jack
Select Wi-Fi network on the instrument
– from instrument Home screen, tap
– tap Networking tab
– tap Wi-Fi (if Wi-Fi is disabled, button in upper right is set to "OFF" and no
wireless networks are listed)
– tap button to enable Wi-Fi and display available Wi-Fi networks
Ethernet port
(Settings)
Thermo Scientific