Thermo Scientific NanoDrop One User Manual page 215

Sample Name
Thermo Scientific
Tap the Sample Name field in any measurement screen to edit the sample name.
When Auto-Naming is On (see
assigned a sample name using the default base name followed by a unique number
starting with "1." The first time this appears is after the first blank measurement and
before the first sample measurement in each experiment as shown below.
Default sample name; tap to edit
In this example, the first sample would be named "Sample 1" followed by "Sample
2," etc. You can edit the default base name and overwrite any sample name.
Note If you edit the sample base name during an experiment when
Auto-Naming is selected, the assigned sample ID numbers restart.
Edit default sample base name
After you measure a blank and before the first sample is measured:
– tap Sample Name field to display keyboard
– enter new base name
– tap Done key
Edit sample name
– from Home screen, tap
– select experiment
– swipe left to show data table
– press and hold sample name to show Sample Details box
– tap Sample Name field to display keyboard
General Settings), each sample is automatically
to open History
NanoDrop One User Guide
9
Learning Center
Basic Instrument Operations
213