Other Measurements; Analog Inputs; Non-Measurements - Thermo Scientific Partisol 2000i Instruction Manual

Firmware Screen Descriptions
Instrument Setup Menu

Other Measurements

Analog Inputs

9-30 Partisol 2000i and Partisol 2000i-D Instruction Manual
DATA IN LREC FIELD
>OTHER MEASUREMENTS
ANALOG INPUTS

NON-MEASUREMENTS

OTHER MEASUREMENTS 2
CTRST SSET
The Other Measurements screen allows the user to assign one of the other
available measurement types to the selected record field. The selected item
is shown by "<--" after it. Note that at this point, pressing
that these are proposed changes as opposed to implemented changes. To
change the selected record format and erase record log file data, see
"Commit Content" that follows.
In the Main Menu, choose Instrument Setup > Datalogging Settings >
●
Select Content > select field > Other Measurements.
OTHER MEASUREMENTS:
>NONE
FLOW VOL
FLOW2 V VOL
FLOW TOTAL
FLOW COV
CTRST SSET
FLOW2 COV
VOLUME
VOLUME2
AMBIENT PRES
FILTER PRES
FILTER2 PRES
AMB PRES AVG
FLT PRES AVG
FLT2 PRES AVG
AMB TMP 5MIN
FLT TMP 5MIN
FLOW 5MIN
FLOW2 5MIN
The Analog Inputs screen allows the user to select the parameter (none or
analog inputs 1–8) to the selected record field. If the I/O expansion board
is not present, Analog Inputs will not be available. The selected item is
shown by "<--" after it. Note that at this point, pressing
that these are proposed changes as opposed to implemented changes. To
change the selected record format and erase record log file data, see
"Commit Content" that follows.
In the Main Menu, choose Instrument Setup > Datalogging Settings >
●
Select Content > select field > Analog Inputs.
1:
INSTS STAT
<--

INSTS STAT
indicates
indicates
Thermo Fisher Scientific