Set Up Ethernet Connection
Thermo Scientific
The instrument Ethernet port can be used to set up a wired connection between the
instrument and either a personal computer (PC) or an active network wall jack.
If the instrument is connected to a network wall jack, you can export data files to a
network location, for example, in order to transfer them to another computer. You
can define multiple network paths that the operator can select when exporting data.
See
Export Settings
for details.
Tools needed:
• Standard (straight through) Ethernet cable (CAT5e or newer is recommended)
Note If the computer is an older model, you may need a crossover Ethernet
cable instead. Most newer model computers are designed to automatically
detect and work with both cable types. However, a straight through cable will
provide best performance.
Set up Ethernet connection
–
from instrument Home screen, tap
–
tap Networking tab
–
tap Ethernet
–
select an Ethernet option and choose OK.
• Direct connection to a PC. Select if you plan to connect an Ethernet
cable between the NanoDrop One instrument and a personal computer.
• Connection to a network jack. Select if you plan to connect an
Ethernet cable between the NanoDrop One instrument and a network
wall jack.
–
connect one end of Ethernet cable to Ethernet port on instrument back panel
9
Learning Center
Set Up the Instrument
NanoDrop One User Guide
191