Thermo Scientific
Note The types of data exported are dependent upon the application used to
measure the samples (nucleic acids in this example). For more information, see
the
application
details.
Data can be exported to a USB device connected to any USB port on the local
instrument (front, back-left or back-right) or to a
multiple experiments for export, each exported experiment has a corresponding file.
The filenames are the same as the
named "NanodropOne" followed by the instrument serial number. (Use
Status
to view your instrument serial number.)
Export data at end of experiment
–
when finished measuring samples, tap
–
from End Experiment box, set Export Data to an available export location
(front, back-left or back-right USB port, or a network location)
–
tap
–
from Export box, select one or more formats to export to (see above for
details) and tap Export
–
after "Export Success" message, tap OK
–
tap End Experiment
network
experiment
names. The files are stored in a folder
NanoDrop One User Guide
9
Learning Center
Basic Instrument Operations
location. If you select
System
231