Table of Contents
Advertisement
Measure Custom
Measure using a Custom Method
To load a custom method
Thermo Scientific
Runs a custom measurement method
created using NanoDrop One software.
Measure Custom Method
Delete Custom Method
Reported Results
Use the Custom application to run a user-defined method created using the
NanoDrop One software running on a personal computer. For more information, see
"Create Custom Method"
Custom methods can only be created on a personal computer running the
NanoDrop One software. If you want to run a custom method and store the
measurement results on the instrument, the method must also reside on the
instrument. (This is the only way to run a custom method if your instrument is not
connected to the computer with an Ethernet cable.)
Load custom methods onto the instrument
1.
Export the method
root of a portable USB device such as a memory stick.
Method files have a ".method" filename extension.
Note Custom methods downloaded from the NanoDrop One website have
a .zip filename extension and must be extracted using a third-party file
decompression program before the software will recognize them as custom
methods.
2. Connect the USB device to one of the
3. From the Home screen, select the Custom tab and select Custom Methods.
4. Use the list box at the top of the screen to indicate the USB port used.
on
page
159.
from the personal computer and copy the method file to the
USB ports
7
Custom Applications
Measure Custom
on the instrument.
NanoDrop One User Guide
153
Advertisement
Table of Contents
