Table of Contents
Advertisement
9
Learning Center
Set Up the Instrument
Set Up the Instrument
Power on/off
Connect Power
Connect an Accessory
Set Up Bluetooth Connections
186
NanoDrop One User Guide
CAUTION Avoid shock hazard. Each wall outlet used must be equipped with a
ground. The ground must be a noncurrent-carrying wire connected to earth
ground at the main distribution box.
Connect the provided power cord to a grounded wall outlet. See
page 274
for more information.
To connect a compatible printer or other compatible accessory such as a USB
keyboard and/or mouse to the instrument, use any USB port on the instrument
(front, back-left or back-right). See
compatible with the NanoDrop One instruments.
Use Bluetooth™ to connect the instrument to one or more Bluetooth (wireless) input
devices such as a Bluetooth keyboard, mouse or barcode scanner.
Note Make sure the device is labeled "Bluetooth" and not just "wireless." All
Bluetooth devices are wireless but not all wireless devices will run with Bluetooth.
Set up Bluetooth connections on the instrument
–
from instrument Home screen, tap
Accessories
for information about accessories
(Settings)
USB-A (2)
Ethernet
Power
"Power Cords"
on
Thermo Scientific
Advertisement
Table of Contents
