Thermo Scientific
–
tap System tab
–
tap Bluetooth (if Bluetooth is disabled, button in upper right is set to "Off"
and no Bluetooth input devices are listed)
–
tap Off button to enable Bluetooth connectivity (button turns blue, changes
to "On" and software automatically searches for any available Bluetooth input
devices)
If no Bluetooth devices are found, after a few seconds the message "No
nearby Bluetooth devices were found" is displayed
–
to add a Bluetooth device, follow manufacturer instructions to pair the
device (for example, you may need to hold down a button) and tap Search
For Devices on instrument)
device name should appear in Available Devices list
9
Learning Center
Set Up the Instrument
NanoDrop One User Guide
187