8
Measure Kinetics
Edit Kinetics Method
174
NanoDrop One User Guide
–
tap
Stages and Intervals
–
select Number of stages and Time unit (minutes or seconds)
–
for each stage, specify # intervals, Interval times and any Delays
between stages
The colored rows and boxes at the right visually represent the specified
stages. The colored rows show the start and end times for each stage; the
colored boxes correspond with the specified delay and number of intervals
for each stage.
–
to save the method and return to the Kinetics menu, tap Save Method
–
to run the method, tap Run Method
Kinetics methods can be edited only on the NanoDrop One instrument. To edit an
existing kinetics method:
–
from Home screen, tap Kinetics tab > Kinetics application
–
select a method by tapping the method name in the Select Method box
–
tap Edit Method
–
edit
method settings
–
tap Save Method to save your changes
–
tap Run Method to run the updated method
tab (the stages and intervals settings are displayed)
as desired
Thermo Scientific