Table of Contents
Advertisement
6.2.2
Measurements
After pressing the button Read Values the current Count rate,
dose rate and dose are displayed in this frame.
With button Start the measured value is read from the unit at a
certain polling interval. Use the scroll bar to define the polling
interval. You can select a value between 1 and 3600 seconds.
The dose rate can be displayed numerically and graphically.
Click on the Graphics.... A diagram is displayed that gives a
representation of the dose rate values versus the time.
The current measured value is added at the right-hand side,
and the diagram is shifted to the left. Up to 100 measured val-
ues can be represented. The graduation of the ordinate is
automatically adjusted to the measured values supplied by the
unit.
Figure 6-2: Measurement graphics
SENTINEL RadEye G
DB-059-060324 E
6-7
Iw/Pi/Ff 30.07.08
Advertisement
Table of Contents
