Table of Contents
Advertisement
Thermo Scientific
After the tenth measurement, a message indicates whether the instrument
passed or failed performance verification:
8. If the instrument failed, immediately repeat step 6 using ten 2 µL aliquots of the
PV-1 solution.
9. When finished, tap End Experiment and
DI H
O.
2
After the test is completed, the results are available from the History (see
example below). See
To interpret performance verification results
If your instrument failed performance verification and you repeated ten
measurements using 2 uL aliquots,
Manage identifiers on the instrument
contact
us.
10
Instrument Diagnostics
clean the pedestals with 3–5 µL
for details.
NanoDrop One User Guide
Maintenance
267
Advertisement
Table of Contents
