Thermo Scientific
–
select remote computer's Wi-Fi network host and tap Connect (here is an
example)
–
tap Back to exit Wi-Fi setup (if the connection is successful, the instrument
is assigned an IP (Internet Protocol) address, which appears at the right of
the Wi-Fi button as in the example below)
Note Some Wi-Fi networks may require an identity, password or other
information before you can connect to them, or they may be anonymous
(that is, you may have to search for them by name). For more information,
see the system administrator at your work site.
–
tap Done to exit Settings
9
Learning Center
Set Up the Instrument
NanoDrop One User Guide
193