Measure Mode; Do Resolution - Thermo Scientific Eutech DO 1730 Operation Manual

3.2.5 Measure Mode

Set the measure mode to dissolved oxygen as %
saturation, concentration in mg/L or concentration in ppm.
Press the  or  key to scroll through the Setup
Menu list until the Measure Mode item is shown.
Press the  or  key to set the measure mode.
Press the "Enter" key to save the change.

3.2.6 DO Resolution

Set displayed dissolved oxygen resolution to 0.1 or 1 %
saturation; 0.01 or 0.1 mg/L or ppm.
The dissolved oxygen units shown in this Setup Menu item
are related to the previous setting selection in the
Measurement Mode item. For this example, dissolved
oxygen in concentration ppm is shown.
Press the  or  key to scroll through the Setup
Menu list until the DO Resolution item is shown.
Press the  or  key to set the DO resolution.
Press the "Enter" key to save the change.
Eutech DO 1730 Dissolved Oxygen Meter 17