Table of Contents
Advertisement
Chapter 14
Custom Report Formatting
GENERAL
The standard report format for the analyzer includes (Figure 14-1):
A header containing the product name and model, the date and time of the site
report, and the site being reported.
The gas data
For single sample log: contains the name of the gas, its HRL and
concentration unit, the location of the readings, the maximum, minimum,
average readings at each date and time along with any alarm flags.
For a continuous type log: contains general statistics and statistics for each gas
followed by the information stated immediately above for a single sample log.
For a spectrum scanning log: contains wavelength and absorbance data for
region scanned
A footer containing user entered data (if any).
MIRAN SapphIRe - XL
LOCATION
--------
OBTAINING A CUSTOM REPORT
To produce a report with a different format:
1. Create a format with a personal computer by downloading the report format
from the analyzer to the PC and modifying it to meet specific needs per this
section of the manual.
2. Sketch out the desired format and Thermo Fisher Scientific will create and sell
a customized format disk.
DATE/TIME
----------------
AREA1
04Jan01 07:35:17
AREA2
04Jan01 07:36:09
AREA3
04Jan01 07:37:02
Figure 14-1. Sample Standard Report Format
SITE: PLANT A
ETO
HRL: 100.00
MAX
------
------
-0.06
-0.06
-0.07
14-1
04Jan01
10:15
ppm
MIN
AVG
FLAGS
------ -----
-0.06
-0.06
...
-0.07
-0.06
...
-0.16
-0.11
...
Advertisement
Table of Contents
