Table of Contents
Advertisement
This manual is for system administrators responsible for configuring,
monitoring, and maintaining the ATX. It should be used with the ATX
User Guide and the ATX MIB Reference Guide. The contents of each
chapter are described below.
•
Chapter 1, Introduction, outlines the contents of this manual and
provides an overview of the 3F00-01 and 3F55-01.
•
Chapter 2, Connecting to the Network, describes how to physically
attach the module to a network.
•
Chapter 3, Configuring the 3F00-01 and 3F55-01, discusses the
software configuration options for the module.
•
Chapter 4, Monitoring and Managing the 3F00-01 and 3F55-01,
provides information on the statistics and traffic analysis available for
the module.
•
Chapter 5, Diagnostics and Troubleshooting, discusses detecting
problems with the module and how to solve them.
•
Chapter 6, Adding/Swapping Modules, gives instructions for
installing a new 3F00-01/3F55-01 and replacing a 3F00-01/3F55-01.
•
Appendix A, Technical Specifications, lists technical information
about the module.
•
Appendix B, Cabling Information, provides cable pinouts.
FDDI Dual-Attached Intelligent Module User's Guide
CHAPTER 1
INTRODUCTION
Page 1-1
Advertisement
Table of Contents
Troubleshooting
