Replacing The Fan Filter - Cabletron Systems FRX6000 Maintenance Manual

5. Slide the drive out toward the front.
6. Remove the drive from its mounting assembly by removing all
necessary screws.
7. Install the replacement drive by reversing the removal pro-
cedure.

Replacing the Fan Filter

Location – see Figure 3-3
Cabletron part number = 81005002.
1. If necessary, remove the cover. (See
2. Remove the three screws shown in the following figure, then
grasp the faceplate along the top edge and pull it forward and
down to pop it out.
Figure 3-15 Removing the Chassis Faceplate
3. Remove the filter. (See the following figure.)
Testing & Replacing Components
(on page 3-3).
page 3-4.)
Screws Faceplate
Mounting
Bracket
3-13