Module Interfaces - Cabletron Systems MMAC-Plus 9A128-01 Management Manual

9A128-01 and 9A129-01
Module Specific Information
Introduction
This appendix contains local management information that is specific to the
following ATM Modules:
• 9A128-01 (1 Port, Multimode Fiber, SC Connector)
• 9A129-01 (1 Port, Single-Mode Fiber, SC Connector)

Module Interfaces

The 9A128-01 and 9A129-01 ATM Modules have four interfaces. Table 1 lists the
identifying number, name, and description of each interface.
Interface
Number
Use the numbers listed in Table 1 to configure the module's default interface (see
the General Configuration Screen).
Table 1. 9A128-01/9A129-01 ATM Module Interfaces
Interface
Name
1 SMB-1
2 SMB-10
3 FNB
4 ATM
Interface
Description
1 Mbps System Management Bus
10 Mbps System Management Bus
Flexible Network Bus
ATM (module front panel)
Appendix
1