Table of Contents
Advertisement
REQUIREMENTS/SPECIFICATIONS
Before you attempt to install your concentrator module, review the
installation requirements and operating specifications that are
outlined in this chapter.
Your network installation must meet the conditions, guidelines,
specifications, and requirements included in this chapter to obtain
satisfactory performance from this equipment. Failure to follow
these guidelines could produce poor network performance.
2.1 NETWORK REQUIREMENTS
Take care in planning and preparing the cabling and connections
for your network. The quality of the connections, the length of
cables and other conditions of the installation are critical factors in
determining the reliability of your network. Work area wall plates/
outlets used for your token ring network should be clearly labeled
as token ring network lobe connections.
The following sections describe network requirements for this
equipment.
2.2 CABLE SPECIFICATIONS
When connecting a Fiber Optic Link Segment to TRFMIM, the
following network requirements must be met:
• Cable Type - The cable must be one of the following multimode
fiber optic media:
-
50/125 m fiber optic cabling.
-
62.5/125 m fiber optic cabling.
-
100/140 m fiber optic cabling.
REQUIREMENTS/SPECIFICATIONS
CHAPTER 2
INSTALLATION
2-1
Advertisement
Table of Contents
