Hdmi Connector; Dvi-I Connector; Displayport Connector; Sc Fiber Optical Connector - Lightware HDMI-3D-OPT-TX210A User Manual


  
3. Product Overview
3.4.2. HDMI Connector
The extenders provide standard 19-pole HDMI connector
for input and output. Always use high-quality HDMI cable
for connecting sources and displays.
3.4.3. DVI-I Connector
SW4-OPT-TX240RAK transmitter provides 29-pole „digital only" DVI-I
Dual-Link connectors (only digital pins are internally connected) for
input and local output. This way, users can plug in any DVI connector,
but keep in mind that analog signals (such as VGA or RGBHV) are not
processed.
Always use high-quality DVI cable for connecting sources and displays.
1 2 3 4 5 6 7
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
Pin Signal Pin
1 TMDS Data2- 16
2 TMDS Data2+ 17
3 TMDS Data2 Shield 18
4 Not connected 19
5 Not connected 20
6 DDC Clock 21
7 DDC Data 22
8 Not connected 23
9 TMDS Data1- 24
10 TMDS Data1+ C1
11 TMDS Data1 Shield C2
12 Not connected C3
13 Not connected C4
14 +5V Power C5
15 GND (for +5V)
3.4.4. DisplayPort Connector
SW4-OPT-TX240RAK transmitter provides standard 20-
pole DisplayPort connector for input. Always use high
quality DP cable for connecting DisplayPort devices.
3.4.5. SC Fiber Optical Connector
HDMI-3D-OPT series transmitters and receivers provide
multimode SC fiber optical input and output connectors.
Maximum fiber cable distances can be found in the
Cable Extensions
WARNING! Please do not look directly into the SC fiber optical
connector if the cable is connected to the transmitter only and the
laser is active.
3.4.6. Analog Stereo Audio Connector (3.5 mm Jack)
The connector is used for receiving unbalanced analog audio
signal. It is also known as (3.5 mm or approx. 1/8") audio jack,
phone jack, phone plug and mini-jack plug.
8
C1 C2
1 2 3
C3 C4
C5
Signal
Hot Plug Detect
You can find more information about audio functions in the
TMDS Data0-
Interface
TMDS Data0+
3.4.7. Analog Stereo Audio Connector (5-pole Phoenix)
TMDS Data0 Shield
5-pole Phoenix connector is used for balanced analog
Not connected
audio output. Unbalanced audio signals can be
Not connected
connected as well. For unbalanced output connect + and ground to
TMDS Clock Shield
the source and connect – to the ground.
TMDS Clock+
TMDS Clock-
Not connected
Not connected
1
Not connected
Not connected
GND
Compatible Plug Type
Phoenix
You can find more information about analog audio function in the
Audio Interface
Wiring Guide
HDMI-3D-OPT series – User's Manual
Maximum Fiber
section.
Pin nr. Signal
1 Left
2 Right
3 Ground
Jack audio plug pin assignments
section.
Pin nr. Signal
1 Left+
2 Left-
2 3 4 5
3 Ground
4 Right-
5 Right+
Analog audio connector and plug pin assignments
Combicon series (3.5mm pitch, 5-pole), type: MC 1.5/5-ST-3.5.
®
section. Audio cable wiring guide is in the
section.
3.4.8. S/PDIF Connector
HDMI-3D-OPT-RX150RA receiver provides standard RCA
receptacles for digital coaxial audio outputs.
You can find more information about audio functions in the
Interface section.
3.4.9. RS-232 Connector (3-pole Phoenix)
The extender contains a 3-pole Phoenix connector which is
used for RS-232 serial connection.
1 2 3
RS-232 connector pin assignments
Compatible Plug Type
Phoenix Combicon series (3.5mm pitch, 3-pole), type: MC 1.5/3-ST-3.5.
®
You can find more information about RS-232 interface in the
Interface section.
Audio
3.4.10. RS-232 Connector (D-sub)
HDMI-3D-OPT-RX150RA
RS-232 port which can be connected by
an industry standard 9-pole D-sub female
connector.
Pin nr.
1 Not connected
2 TX data transmit (output)
3 RX data receive (input)
4 DTR (Internally connected to Pin 6)
5 GND signal ground (shield)
6 DSR (Internally connected to Pin 4)
7 RTS (Internally connected to Pin 8)
8 CTS (Internally connected to Pin 7)
9 Not connected
You can find more information about RS-232 interface in the
Interface section.
Audio Cable
14
Audio
Pin nr. Signal
1 Ground
2 TX data
3 RX data
Serial
receiver contains
5 1
9 6
RS-232 pin-out
Serial