Hdmi Connector; Ethernet Connectors; Neutrik Opticalcon Connectors - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
2. Product Overview 2. Product Overview
2.3.6. HDMI Connector
The endpoint device provides standard 19-pole HDMI connector for inputs and outputs with
HDMI 2.0 support. Always use high quality HDMI cable for connecting sources and displays.
2.3.7. Ethernet Connectors
Standard RJ45 Connector
UBEX F-series endpoint devices provide standard RJ45 connectors for LAN and user Ethernet
access. Always use high quality Ethernet cable.
Neutrik etherCON Connector
UBEX R-series endpoint devices provides Neutrik etherCON NE8FDV-YK connector for LAN
and user Ethernet access.
ATTENTION!
Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S*
cables.
Wiring of LAN Cables
Lightware recommends the termination of LAN cables on the basis of TIA/EIA T 568 A or TIA/EIA T 568 B
standards.
Top
Pin TIA/EIA T568 A Color and name
1
2
3
4
5
6
7
8
Wiring of LAN cables by types
WARNING!
Never connect non-assembled CATx cable to the port while the unit is powered, it may
damage the device!
Side
Bottom
TIA/EIA T568 B Color and name
white/green stripe white/orange stripe
green solid orange solid
white/orange stripe white/green stripe
blue solid blue solid
white/blue stripe white/blue stripe
orange solid green solid
white/brown stripe white/brown stripe
brown solid brown solid
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
2.3.8. Neutrik opticalCON Connectors
UBEX R-series endpoint devices are built with singlemode or multimode Neutrik opticalCON connectors.
Number of
connectors
Connector
drawing
Connector type
Type of the SFP+
module inside
the enclosure
Mode
Supported cable
Number of
required optical
cables for 20GbE

ATTENTION! The 2xSM-BiDi-DUO model does not support the Neutrik opticalCON DUO cross cables. Please
use standard cables only.
See the details about the maximum fiber cable extensions in the
See the more details about the cabling between the Neutrik optical connectors and the SFP+ modules
installed in a F-series endpoint in the
UBEX-PRO20-HDMI-R100 models
2 2 1
NO2-4FDW-A
Module A:
1x Finisar
FTLX2072D327
2x Finisar 2x Finisar
FTLX8574D3BCL FTLX1475D3BCL
Module B:
1x Finisar
FTLX2072D333
Multimode Singlemode Singlemode
LC, Neutrik LC, Neutrik LC, Neutrik
opticalCON opticalCON opticalCON
DUO DUO DUO
1x Neutrik
2x Neutrik opticalCON DUO /
opticalCON DUO
4x LC simplex / 2x LC duplex
/ 2x LC simplex
R-series Endpoint
Connection between F-series and R-series Endpoints
19 19
1 1
NO4FDW-A
2x Finisar 2x Finisar
FTLX8574D3BCL FTLX1475D3BCL
Multimode Singlemode
Neutrik Neutrik
opticalCON opticalCON
QUAD QUAD
1x Neutrik opticalCON QUAD
section.
section.