Rear View; Electrical Connections; Dvi-I Connector; Hdmi Connector - Lightware HDMI-TPS-TX210 User Manual


  
3. Product Overview
3.2. Rear View
HDMI-TPS-TX210
1 3 4 5 6
HDMI-TPS-TX220
1 3 4 5 6
DVI-HDCP-TPS-TX210
2 3 4 5 6
DVI-HDCP-TPS-TX220
2 3 4 5 6
DP-TPS-TX210
1 3 4 5 6
DP-TPS-TX220
1 3 4 5 6
SW4-TPS-TX240
1
8 9
HDMI output
1
2 DVI-D
7 8 9
output
3 TPS output
8 9
4 Ethernet
5 Status LEDs
7 8 9
6 IR IN and
OUT
GPIO
8 9 7
RS-232
8
connector
7 8 9
9 12V DC
connector
HDMI-TPS-TX200 series – User's Manual
3 4 5 6 7 8 9
Local HDMI output with the same A/V content
as the TPS output.
Local DVI-D output with the same A/V content
as the TPS output.
Locking RJ45 connector for HDBaseT
TM
signal transmission. Maximum CATx cable
distances can be found in the Maximum
Extension Distances section.
Locking RJ-45 connector for configuring the
device using Lightware Device Controller
(LDC), or upgrading it using Lightware Device
Updater (LDU). Any third-party control system
can use this port to control the device.
The LEDs give feedback about the actual
state of the device. See the details in the Rear
Panel Status LEDs section.
3-pole TRS connector, also known as 3.5 mm
(1/8") jack plug for optional IR receiver (IR IN) and
transmitter (IR OUT) connection. Pin assignments
can be found in the IR Connector section.
8-pole Phoenix connector for configurable
general purpose input/output ports. Pin
assignment can be found in the GPIO -
General Purpose Input/Output Ports section.
3-pole Phoenix connector for controlling
the device with LDC or third-party control
systems, or third-party device control. Pin
assignment can be found in the RS-232
Connector section.
12V DC input for local powering. For more
details see the 12V DC Connection section or
see all the available Powering Options.
3.3. Electrical Connections
3.3.1. DVI-I Connector
DVI-HDCP-TPS-TX210/TX220 and SW4-TPS-TX240 transmitters
provide 29 pole „digital only" DVI-I Dual-Link connectors (only digital
pins are internally connected) for input and local output. This way,
users can plug in any DVI connector, but keep in mind that analog
signals (such as VGA or RGBHV) are not processed.
Always use high quality DVI cable for connecting sources and displays.
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
Pin Signal Pin
1 TMDS Data2- 16
2 TMDS Data2+ 17
3 TMDS Data2 Shield 18
4 Not connected 19
5 Not connected 20
6 DDC Clock 21
7 DDC Data 22
8 Not connected 23
9 TMDS Data1- 24
10 TMDS Data1+ C1
11 TMDS Data1 Shield C2
12 Not connected C3
13 Not connected C4
14 +5V Power C5
15 GND (for +5V)
3.3.2. HDMI Connector
The extender provides standard 19 pole HDMI connector
for input and local output. Always use high quality HDMI
cable for connecting sources and displays.
13
C1 C2
C3 C4
C5
Signal
Hot Plug Detect
TMDS Data0-
TMDS Data0+
TMDS Data0 Shield
Not connected
Not connected
TMDS Clock Shield
TMDS Clock+
TMDS Clock-
Not connected
Not connected
Not connected
Not connected
GND