Table of Contents
Advertisement
8 •
751-5202 [AS-Interface Module 4IN/3OUT 24V/2A A/B]
View
2 AS-Interface Components
2.1 AS-Interface Module IP67
2.1.1 751-5202 [AS-Interface Module 4IN/3OUT 24V/2A A/B]
Digital I/O-Module 4 IN / 3 OUT 24 V / 2 A A/B
2.1.1.1 View
Status
inputs
Status
outputs
Error
Status
AS-interface,
AUX supply
Fig. 2.1.1-1: View
2.1.1.2 Description
The AS-Interface module 751-5202 is an economical solution for a fieldbus-
independent and flexible connection of actuators and sensors from the field
and the control cabinet. The module is in accordance with AS-Interface
specification V.3.0.
The module works in extended address area and can be set to one of 62
addresses ranging from 1A ... 31A resp. 1B ... 31B.
The voltage for the sensors is supplied via the AS-Interface cable and is short
circuit protected.
The voltage for the actuators is supplied via the AUX black cable.
The AS-Interface module 751-5202 provides 4 digital 24 V inputs and 3
digital 24 V / 2 A outputs.
The sensors and actuators are connected using M12x1 round plugs. The AS-
Interface cable and the AUX cable can be connected directly.
LEDs indicate the status of inputs and outputs, the AS-Interface and actuator
supply as well as a short circuit or overload condition.
7
8
IN 3
IN 4
5
6
IN 1
IN 2
3
4
OUT 3
1
2
OUT 1
OUT 2
FID/FAULT
IR
751-5202
PGM
AUX
ASI
NTERFACE
Sensor connectors
Actuator connectors
AS-interface flat cable
AUX supply flat cable
Programming device
connector
WAGO-I/O-SYSTEM 751
AS-Interface Components IP67
gq52020e
Advertisement
Table of Contents
