Appendix; Configuration And Parameterization Via Gsd-File; Configuration Of The Rs-232/Rs-485 Serial Interface; Configuration Via Gsd - WAGO 750-652/040-000 Manual

84

Appendix

11 Appendix
11.1

Configuration and Parameterization via GSD-File

11.1.1

Configuration of the RS-232/RS-485 Serial Interface

When using the aforementioned PROFIBUS-DP fieldbus coupler
750-333/040-000, the process image size is configured by selecting the
corresponding PI module type.

Table 59: Configuration

PI module type
75x-652 ser. interf. 8 bytes
75x-652 ser. interf. 24 bytes
75x-652 ser. interf. 48 bytes
11.1.2

Configuration via GSD

Apart from the RTS lead and follow-on time, the GSD file can be used to provide
the I/O module on the PROFIBUS DP fieldbus coupler with all operating
parameters.
Figure 31: Example of the PROFIBUS DP Fieldbus Coupler Configuration Dialog
Manual
Version 1.3.0
750-652/040-000 Serial Interface RS-232/RS-485 XTR
Representatives
of the module
type
75x-652
WAGO-I/O-SYSTEM 750 XTR
PI data type Instances
Inp.
Unsigned8[2]
OctetString [6]
Unsigned8[2]
1
OctetString [22]
Unsigned8[2]
OctetString [46]
Outp.
1