Calibration Movement Directions For All Axes - ABB IRB 6620LX Product Manual

5 Calibration

5.2.2 Calibration movement directions for all axes

5.2.2 Calibration movement directions for all axes
Overview
When calibrating, the axis must consistently be run towards the calibration position
in the same direction in order to avoid position errors caused by backlash in gears
and so on. Positive directions are shown in the graphic below.
Calibration service routines will handle the calibration movements automatically
and these might be different from the positive directions shown below.
Manual movement directions IRB6620 LX
xx0900000140
304
© Copyright 2009-2018 ABB. All rights reserved.
Product manual - IRB 6620LX
3HAC035737-001 Revision: P