ABB IRB 6620LX Product Manual page 277

Equipment, etc
Other tools and proced-
ures may be required.
See references to these
procedures in the step-
by-step instructions be-
low.
Deciding calibration routine
Decide which calibration routine to be used, based on the information in the table.
Depending on which routine is chosen, action might be required prior to beginning
the repair work of the robot, see the table.
1
Removal
The procedure below details how to remove gearbox axis 2.
1
Product manual - IRB 6620LX
3HAC035737-001 Revision: P
Spare part no.
Action
Decide which calibration routine to use for
calibrating the robot.
• Reference calibration. External cable
packages (DressPack) and tools can
stay fitted on the robot.
• Fine calibration. All external cable
packages (DressPack) and tools
must be removed from the robot.
If the robot is to be calibrated with refer-
ence calibration:
Find previous reference values for the axis
or create new reference values. These val-
ues are to be used after the repair proced-
ure is completed, for calibration of the ro-
bot.
If no previous reference values exist, and
no new reference values can be created,
then reference calibration is not possible.
If the robot is to be calibrated with fine
calibration:
Remove all external cable packages
(DressPack) and tools from the robot.
Action
Decide which calibration routine
to use, and take actions accord-
ingly prior to beginning the repair
procedure.
© Copyright 2009-2018 ABB. All rights reserved.
4.7.2 Replacement gearbox axis 2
Art. no.
Note
Follow the instructions given in the refer-
ence calibration routine on the FlexPendant
to create reference values.
Creating new values requires possibility to
move the robot.
Read more about reference calibration for
Axis Calibration in
routine on page 321.
Read more about reference calibration for
Pendulum Calibration in Operating manu-
al - Calibration Pendulum.
Note
Continues on next page
4 Repair
Continued
Note
These procedures in-
clude references to the
tools required.
Reference calibration
277