Testing Printer Operation - Agilent Technologies ESA-E Series Programmer's Manual

Programming Fundamentals
Printer Setup and Operation
Testing Printer Operatio n
When you have completed the printer setup for the analyzer, press
Prin t
Setup, Print (Screen)
and then press
Print
on the front panel . If the
printer is ready and the printer setup was successful, a printout of th e
analyzer display will be printed . If the printer is not ready, the messag e
Printer Timeout will appear on the analyzer display. Printe r
Timeout will remain on the display until the printer is ready or unti l
you press ESC to cancel the printout request.
1-16
Chapter 1