Agilent Technologies ESA-E Series Programmer's Manual page 249

Language Reference
[ :SENSe] :CHPower Subsectio n
[:SENSe]:CHPower Subsection
Set Channel Power Number of Average s
[ :SENSe] :CHPower :AVERage :COUNt <integer>
[ :SENSe] :CHPower :AVERage :COUNt ?
Set the channel power measurement number of averages .
Remarks : This command is used for measurements in th e
MEASURE
menu .
Front Panel
Access:
Meas Setup, Avg Numbe r
Channel Power Averaging On/Off
[ :SENSe] :CHPower :AVERage[ :STATe] OFFIONIO1 1
[ :SENSe] :CHPower :AVERage[ :STATe] ?
Turn on or off the channel power measurement averaging.
Factory Prese t
and *RST : Of f
Remarks: This command is used for measurements in th e
MEASURE menu .
Front Pane l
Access:
Meas Setup, Avg Number On Off
Set Channel Power Integration Bandwidt h
[ :SENSe] :CHPower :BANDwidthlBWIDth :INTegration <freq>
[ :SENSe] :CHPower :BANDwidthIBNIDth :INTegration ?
Set the frequency span (bandwidth) over which to integrate power.
Remarks: This command is used for measurements in the
MEASURE
menu.
Front Pane l
Access:
Meas Setup, Integration BW
Chapter 5 5-89