Agilent Technologies ESA-E Series Programmer's Manual page 299

Language Reference
STATus:QUEStionable Subsectio n
Questionable Integrity Uncalibrated Event Quer y
STATus :QUEStionable :INTegrity :UNCalibrated[ :EVENt] ?
This query returns the decimal value of the sum of the bits in the
Questionable Integrity Uncalibrated Event register .
NOTE The register requires that the equivalent PTR or NTR filters be se t
before a condition register bit can set a bit in the event register.
The data in this register is latched until it is queried . Once queried, the
data is cleared .
Questionable Integrity Uncalibrated Negativ e
Transition
STATus :QUEStionable :InTegrity :UNCalibrated :NTRansition
<number>
STATus :QUEStionable :InTegrity :UNCalibrated :NTRansition?
This command determines which bits in the Questionable Integrit y
Uncalibrated Condition register will set the corresponding bit in th e
Questionable Integrity Uncalibrated Event register when that bit has a
negative transition (1 to 0) . The variable <number> is the sum of the
decimal values of the bits that you want to enable.
Factory Prese t
and *RST:
0
Range : 0 to 3276 7
Questionable Integrity Uncalibrated Positive
Transition
STATus :QUEStionable :InTegrity :UNCalibrated :PTRansition
<number>
STATus :QUEStionable:InTegrity :UNCalibrated :PTRansition?
This command determines which bits in the Questionable Integrit y
Uncalibrated Condition register will set the corresponding bit in th e
Questionable Integrity Uncalibrated Event register when that bit has a
positive transition (0 to 1) . The variable <number> is the sum of th e
decimal values of the bits that you want to enable.
Factory Preset
and *RST: 32767 (all 1's )
Range : 0 to 32767
Chapter 5 5-139