Agilent Technologies ESA-E Series Programmer's Manual page 191

Language Referenc e
CALCuIate :MARKer Subsectio n
Set Span to the Marker Valu e
:CALCulate :MARKer[1]121314[ :SET] :SPAN
Sets the span to the value of the specified marker frequency . The
specified marker must be in delta mode. Select the delta marker mode
with CALCulate :MARKer[1] 121314:MODE DELTa. This command is
not available in zero span .
Front Panel
Access :
Marker, Delta, Marker ->, Mkr /1-> Spa n
Set Start Frequency to the Marker Value
:CALCulate :MARKer[1]121314[ :SET] :STARt
Sets the start frequency to the value of the specified marker frequency.
In delta marker mode, the start frequency is set to the marker delt a
value. This command is not available in zero span .
Front Panel
Access : Marker ->, Mkr -> Start
Set Center Frequency Step Size to the Marker Valu e
:CALCulate :MARKer[1]121314[ :SET] :STEP
Sets the center frequency step size to match the marker frequency I n
delta marker mode, the center frequency step size will be set to th e
frequency difference between the markers . Select the delta marker
mode with :
CALCul ate : MARKer [ 1 ] ~ 2 ~ 3 ~ 4 : MODE DELTa .
This
command is not available if the delta marker is off, or in zero span .
Front Panel
Access : Marker ->, Mkr -> CF Step
Peak Search (or Search), Meas Tools, Mkr -> C F
Set Stop Frequency to the Marker Valu e
:CALCulate :MARKer[1]~2~3~4[ :SET] :STOP
Sets the stop frequency to the value of the active marker frequency I n
delta marker mode, the stop frequency is set to the marker delta value .
This command is not available in zero span .
Front Panel
Access : Marker ->, Mkr -> Stop
Marker On/Off
:CALCulate :MARKer[1]121314 :STATe OFFION101 1
:CALCulate :MARKer[1]I21314 :STATe ?
Chapter 5 5-31