Agilent Technologies ESA-E Series Programmer's Manual page 17

Content s
TRIGger Subsystem 5-15 9
External Trigger, Line, and TV Trigger Delay Value 5-15 9
External Trigger, Line, and TV Trigger Delay Enable 5-15 9
External Trigger Slope 5-15 9
Trigger Offset 5-16 0
Trigger Offset On/Off 5-16 1
Trigger Source 5-16 1
Set TV Field Mode 5-16 2
Set TV Line Number for Synchronization 5-16 3
Set Analyzer for TV Picture Monitoring 5-16 3
Set the Video Waveform Sync . Pulse Direction 5-16 3
Select TV Signal Path 5-164
Select TV Standard 5-164
Video Trigger Level Amplitude 5-165
Video Trigger Level Frequency 5-16 6
UNIT Subsystem
5-16 7
Select Power Units of Measure 5-16 7
6. Agilent 8590/ESA Spectrum Analyzers Programming Conversion Guide
7. Error Messages
Error Messages 7- 2
Status Messages 7- 3
Informational Messages
7- 8
Error Queues 7-1 3
Error Message Format 7-14
Error Message Types 7-1 5
0 :
No Error
7-1 7
-499 to -400:
Query Errors 7-18
- 399 to -300:
Device-Specific Error Messages 7-2 0
Device-Specific Error Message Descriptions 7-20
-299 to -200:
Execution Error Messages 7-2 1
Execution Error Message Descriptions 7-2 1
- 199 to -100:
Command Errors 7-22
201 to 799:
Device-Specific Errors 7-2 7
Greater than 1000:
Personality Specific Error Messages 7-3 7
xvii