Agilent Technologies ESA-E Series Programmer's Manual page 10

Contents
Define Peak Threshold 5-3 0
Peak to Peak Delta Markers 5-3 0
Set Center Frequency to the Marker Value 5-3 0
Set Reference Level to the Marker Value 5-3 0
Set Span to the Marker Value 5-3 1
Set Start Frequency to the Marker Value 5-3 1
Set Center Frequency Step Size to the Marker Value 5-3 1
Set Stop Frequency to the Marker Value 5-3 1
Marker On/Off
5-3 1
Marker Table On/Off
5-3 2
Marker to Trace 5-3 2
Marker to Trace Auto 5-3 2
Continuous Signal Tracking Function 5-3 2
Marker X Value 5-3 3
Span Markers Center Frequency X Value 5-3 3
Marker X Position
5-3 3
Span Markers Center Frequency X Position
5-3 4
Span Markers Span X Position 5-3 4
Band Markers Start Frequency X Position 5-3 4
Band Markers Stop Frequency X Position 5-35
Marker X-Axis Readout 5-35
Span-Markers Span X Value 5-3 6
Band-Markers Start Frequency X Value
5-36
Band-Markers Stop Frequency X Value
5-3 6
Marker Read Y Value 5-3 7
CALCulate:NTData Subsection 5-38
Normalize the Trace Data 5-3 8
CONFigure Subsystem 5-3 9
Configure the Adjacent Channel Power Measurements 5-39
Configure the Channel Power and Density Measurements 5-39
Configure the Emission Bandwidth Measurements 5-39
Configure the Harmonic Distortion Measurements 5-39
Configure the OBW and Transmit Frequency Error Measurements 5-39
COUPle Subsystem 5-40
COUPle the Function to Other Settings
5-40
DISPlay Subsystem 5-41
Display Viewing Angle 5-4 1
Date and Time Display Format 5-41
Date and Time Display 5-4 1
Display Annotation Title Data 5-4 2
Turn the Entire Display On/Off 5-4 2
Window Annotation 5-42
Trace Graticule Display 5-4 3
Trace X-Axis Scale Offset 5-4 3
Set the Display Line 5-4 3
Control the Display Line 5-44
Normalized Reference Level 5-4 4
Normalized Reference Level Position 5-4 4
Reference Level Auto Ranging 5-45
x